Icom ID-51A Basic Instructions

New2001
2
1
PANEL DESCRIPTION
New2001
1
iMODE•SCANKEY[MODE•SCAN]
➥ Push to select the operating mode. (p. 34)
 •Selectableoperating modesareAM,FM,FM-Nor
DV.
➥ Hold down for 1 second to enter the scan type
selection mode.
 •Pushagaintostartthescan.
 •Push to stop the scan.
oMAIN•DUALKEY[MAIN•DUAL]
➥ Push to toggle the main band between A and B
bands. (p. 32)
➥ Hold down for 1 second to toggle the dualwatch
function ON or OFF. (p. 32)
!0microSDCARDSLOT[micromicroSD]
Insert a microSD card of up to 32 GB microSDHC.
!1ENTERKEY[ENT]
 WhileintheDRscreen,orwiththeMenuscreenorQuick
Menu screen open, push to open or set the selected item
or option.
!2DR(D-STARREPEATER)/D-PAD(DOWN)KEY
[DR]/D-pad()
➥ Hold down for 1 second to enter the DR
screen.
➥ While in the DR screen, or with the Menu screen
orQuickMenuscreenopen,pushtomovethe
value or option selector bar down.
!3EXTERNALDCINJACK[DCIN]
Connects to the supplied BC-167SA/SD/SV wall char- ➥
ger, to charge the attached battery pack. (p. 10)
Connect an external DC power supply through the ➥
optional CP-12L or CP-19R cigarette lighter cable or
OPC-254L DC power cable for external DC operation.
!4 DATAJACK[DATA]
Connects to a PC through the optional data communica-
tion cable, for data communication in the DV mode, or for
cloning. The jack is also used to connect an external GPS
receiver.
!5QUICKMENU•SPEECHKEY[QUICKSPCH]
➥Push to enter or exit the Quick Menu screen.
(p. 4)
 •The Quick Menu is used to quickly select various
functions.
➥ Hold down for 1 second to audibly announce
the displayed frequency, operating mode or call
sign.
PANEL DESCRIPTION

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)