IDEC MICROSmart FC6A Series Ladder Programming Manual

FC6A S ERIES MICROS MART L ADDER P ROGRAMMING M ANUAL FC9Y-B1726 19-49
19: PID C ONTROL I NSTRUCTION
6. Use the Module Configuration Editor to configure the analog input for the analog I/O cartridge.
On the Configuration tab, in the PLCs group, select Expansion Modules.
7. Select FC6A-PJ2CP in the expansion modules and cartridges list and drag and drop it to the module configuration area.
8. Click the FC6A-PJ2CP analog I/O cartridge that was interested in the module configuration area and click Configure.
The Analog Parameters Configuration (Cartridge Slot 1) dialog box is displayed.
9. Configure the items.
• For channel IN0 : AI2 Data Type, select Celsius (°C) (1).
10.
Click OK to close the Analog Parameters Configuration (Cartridge Slot 1) dialog box.
1.

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English