IDEC MICROSmart FC6A Series

FC6A S ERIES MICROS MART L ADDER P ROGRAMMING M ANUAL FC9Y-B1726 26-5
26: S CRIPT
Script Programming and Management
Script Registration Procedure
This section describes the procedure to create and register a script. The registered script can be executed by specifying the script
ID in the SCRPT instruction.
1. On the Project Window, double-click Script Manager.
Script Manager dialog box opens.
2. Click Add.
Script Editor dialog box opens.
3. Specify Script ID.
When creating a new script, enter the script ID (1 to 255).