IGS BAOHUI HYPER CROSS - Fan Speed Test; Drain Valve Test

35
Using the Operator Settings
4.3.9 Fan Speed Test
On the page of ȞFan speed Testȟ, you can test whether the fan is functioning normally or
not.
ɖ Enter ȞMain Menuȟɚ Ȟ1 Hardware Testȟɚ Ȟ)DQ6SHHG7HVWȟ, and the screen
will display as below:
ɖ Use the ȞUpȟ button and ȞDownȟbutton to move the cursorˈthen press the ȞStartȟ
button to run testing.
ɖ The fan will be tested in order, from 1/4 to 4/4.
ɖ While testing, press the ȞStartȟ button one more time to discontinue the testing
process.
ɖ Move the cursor to Ȟ([LWȟ, and press the ȞStartȟ button to return to Ȟ1
Hardware Testȟ.
4.3.10 Drain Valve Test
On the page of ȞDrain Valve Testȟ, you can test whether the drain valve drains normally
or not.
ɖ Enter ȞMain MenuȟɚȞ1 Hardware TestȟɚȞDrain Valve Testȟ, and the screen will
display as below:
ɖ Move the cursor and then press theȞStartȟbutton to test the drain valve.
ɖ Move the cursor to Ȟ([LWȟ, and press the ȞStartȟ button to return to Ȟ1
Hardware Testȟ.
Hardware Test