Inficon UL6000 Fab - Saving and Managing Sets of Parameters

6 | Operation INFICON
88 / 152 UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206)
► To modify parameters, press alternatively a subheading in the list. A separate
setting window will be opened, where you can change and save.
ð After changing a parameter setting in a separate window press to return to
the list of parameters.
6.10.2 Saving and managing sets of parameters
A set of parameters is a collection of parameters with the relevant settings of the
device. You are able to save sets of parameters in text-based files at any time. The
parameters can be viewed in clearly arranged form.
ü Supervisor rights
1 > Parameter sets > Manage parameter sets
ð Sets of parameters already created will be displayed as a list.
If the values of a saved set of parameters match the actual settings of the
device 100 %, a green dot will be displayed.
2 To create a new set of parameters, press .
ð In the next window you can insert a free text description. The prefix
“parameter-set” and the date of saving are used for the file name. Save .
You are able to save max 10 sets of parameters.
3 To open the context menu of a created set of parameters, press the desired set
of parameter and choose
, to view further details concerning the parameters contained. If parameters
do not match actual device settings, an orange dot will be displayed.
If there is a missing setting, a red dot will be displayed (after a software update
for example). We recommend to view the missing setting, to create a new set of
parameters and to delete the old set of parameters.
, to activate a set of parameters.
, to delete a set of parameters.