Inficon UL6000 Fab - Basic Settings; Set Language on the User Interface; Setting Date, Time and Time Zone; User Profile Settings

6 | Operation INFICON
52 / 152 UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206)
6.2 Basic settings
6.2.1 Set language on the user interface
You can set the language in the user settings, see "Select, modify, create user profile
[}53]".
6.2.2 Setting date, time and time zone
ü Supervisor rights
1 > Setup > General > Date and time
2 Adjust.
3 Save .
Alternatively, press in the upper window bar and make your settings.
6.2.3 User profile settings
6.2.3.1 Overview of Rights Groups
The rights of a user depend upon which group he belongs to.
User
Members of the group User can
• perform measurements,
• view history of the measurement results,
• view device information,
• view error logs.
Operator
Members of the group Operator have all the rights of the group User. Moreover,
they can
• Create/modify/delete user,
• Export/delete measurement data,
• Modify measurement settings,
Supervisor
Members of the group Supervisor have all the rights of groups User and
Operator. Moreover, they can
• Create/modify/delete operators,
• Create/modify/delete supervisors,
• Perform software updates,
• Modify date/time.