Inficon UL6000 Fab - Presentation of the Measurement Screen; Changing the Presentation of the Line Graph

INFICON Operation | 6
UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206) 55 / 152
ü The requested user was already created. See "Select, modify, create user profile
[}53]".
1 > User accounts > Manage Automatic Login
2 In the “Manage Automatic Login” window, activate the option “Active”.
3 Enter the name of the user in the "Name" field. Note the uppercase/lowercase.
4 Enter the current PIN of the user profile in the "PIN" field.
5 Save .
6.2.6 Presentation of the measurement screen
To switch between the different diagram presentation press on the lower left of the
measurement screen, see "Design of touchscreen [}27]”.
You can select between the following presentations:
• Line chart
• Bar chart
• Circle chart
You can further configure the different diagram presentations. See "Changing the
presentation of the line graph [}55]", "Changing the presentation of the bar graph
[}56]", "Changing the presentation of the circle graph [}57]".
6.2.6.1 Changing the presentation of the line graph
Supervisor
ULTRA
Fig.10: Presentation of the line graph
ü Operator or Supervisor rights
1 > Display > Line chart