Inficon UL6000 Fab - Information; Call the Latest Information to the Current Measurement Value; Call the Latest Information to the Current Calibration Value; Information on Connected Accessories

INFICON Operation | 6
UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206) 85 / 152
the database
“Level“
“Oldest record“: Time stamp of the oldest measurement value
“Newest record“: Time stamp of the newest measurement value
See also
2 Resetting to factory settings [}93]
6.8 Information
6.8.1 Call the latest information to the current measurement
value
► > Measurement values > Leak rate and pressure
ð The leak rate and different pressure values are shown.
► > Measurement values > Temperature
ð Different temperature values are displayed.
► > Measurement values > Run times
ð The current runtime information is displayed.
6.8.2 Call the latest information to the current calibration value
► > Calibration
6.8.3 Information on connected accessories
► > Accessories > I/O module
ð If an I/O module is connected, you will find details.
► > Accessories > Bus module
ð If a bus module is connected, you will find details.
6.8.4 Retrieve information about the device
Diverse information on the device is shown: Software and serial numbers, network
information and operating hours.
► > Device > Identification
► > Device > Network