INFICON Installation | 5
UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206) 43 / 152
5.2 Connect the supplied accessories
Install the “Hook for power line and sniffer line”
Scope of delivery (amount): Hook (4x), screw M6 x 12 (4x), lock washer S6 (4x)
Required tools (supplied): Wrench T30 (Torx)
• In order to be able to fix the mains cable and, if necessary, a sniffer line on the
device, mount the hooks on the device as shown.
• If there is a bottle holder attached to the device, mount the hooks on the bottle
holder and secure the screws with the delivered nuts.
1 Hook 2 Screw M6 x 12
3 Guard washer S6
To Next Page
Loading...
