Inficon UL6000 Fab - Update the Software in Expert Mode; Activate Additional Function; Use External Monitor

INFICON Operation | 6
UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206) 91 / 152
6.11.3 Update the software in expert mode
ü Supervisor rights
1 > Update > Update operating unit/basic unit > Operating unit expert update
ð Software versions already available on the device are shown in a list.
2 Highlight any of the software versions as required and proceed to step 5.
ð Resetting to an older software version is possible.
3 If alternatively you want to add a new software version, connect a FAT32
formatted USB flash drive with the update file to one of the USB ports of the
device.
4 In order to load the new software version, press on .
5 To activate the new version, select the desired list entry and press .
ð After completion there is an automatic restart of the system.
6.11.4 Activate additional function
If your leak detector offers the possibility, you can purchase one or more additional
functions and activate them by means of an activation code.
ü You have ordered an additional feature from the manufacturer specifying the serial
number of your leak detector.
ü You have received an unlock code from the manufacturer.
ü Supervisor rights
1 > Update > Unlock feature
2 Enter your unlock code in the "Unlock code" field.
3 Save .
ð After successful unlock the new function will be displayed.
The unlocked function is not lost even if the factory settings are reset.
6.12 Use external monitor
You are able to use an external touch monitor instead of the internal monitor. You can
use either the internal or the external monitor.
ü You have a control unit with HDMI interface, for the illustration see “Control unit
[}23]“.
ü You have a touch monitor with connections for HDMI and USB, furthermore an
appropriate power supply. HDMI is required to transmit the images, USB is required
to transmit the sound.