Inficon UL6000 Fab - Select, Modify, Create User Profile

INFICON Operation | 6
UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206) 53 / 152
6.2.3.2 Select, modify, create user profile
ü Operator or Supervisor rights
1 > User accounts > Manage user accounts
ð Existing users and associated groups are displayed in list form.
2 You have the following possibilities:
To create a new user profile, select at the bottom of the window.
The window "User profile" opens.
Otherwise, press an already created user name and choose from the tool bar:
, to load a user profile.
The login window opens.
, to modify a user profile.
The window "User profile" opens.
, to delete a user profile.
A confirmation screen appears.
3 After selecting some tools, the “User profile” window opens. If this window
opens, enter a user name, change it, or keep it as required.
Mueller
User
Mueller
PIN
Name
Group
Language
German
User profile
4 If the "PIN" field is not filled in or you want to change the content, enter a 4-digit
PIN.
5 To assign the required rights to the user, select a group. Via and select
between the groups User, Operator and Supervisor. See "Overview of Rights
Groups [}52]".
6 In the field "Language" assign a language to the user via and .