6 | Operation INFICON
82 / 152 UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206)
3 Under “Export format” select between "CSV en", "CSV de" and "JSON".
ð Standard is "CSV en".
For "CSV en", the column separator is a comma.
For "CSV de", the column separator is a semicolon.
"JSON" is a language-independent data format.
ð Export files have a default name with timestamp and extension (e.g.
icmeas20160720-082829.csv).
4 To export measurement data in addition to the measurement data, such as the
serial number of the device, activate the "Export metadata" option.
ð Note: If other data is exported in addition to measurement data, this can
increase the effort required for data post-processing.
5 Save .
6.7.2 Display measurement cycles
The measuring cycle is the time between pressing the START button and the STOP
button. You can view the associated information and optionally edit 2 free text fields.
1 > Measurement data > Measurement cycles
ð Stored measurement cycles with ID, start and end time are displayed.
2 To view the details of a measurement cycle, select the desired entry by
touching it and press .
ð All information belonging to the measurement cycle and a chart are
displayed.
3 To edit text in the “Free text 1” and "Free text 2” fields, press .
ð Alternatively, you can edit "Free text 1" and "Free text 2" from the
"Measurement cycles" window. Select an entry by tapping on it and press .
4 To change the displayed period in the detailed view on the chart, swipe to the
right or left on the display.
To change the time axis, press to zoom in or to zoom out. The value axis
is always set automatically.
To Next Page
Loading...
