80 Options and programming methods
Anti-intrusion control panels
SMS message number/index
This option can be programmed solely via the SmartLeague software programme.
This option is applies only when a Nexus device is installed and the “Automatic SMS”
option is disabled. It determines which of the 50 available SMS messages will be sent
(refer to paragraph 7-29-3 Text for SMS messages) when the event occurs.
7-11-1
Shortcut on event
A shortcut can be associated with each event, the selected shortcut will activate as soon
as the events activates. This process can be done via the SmartLeague software
program only.
These shortcuts function differently from those which can be activated by the user
(refer to Appendix B, Shortcuts at default) and allow the control panel to activate
automatically determined operations when the event occurs.
The programming phase can be accessed via the SmartLeague, by selecting the event
from the system tree menu (on the left) that is to be assigned to the shortcut on the
respective “Programming” page (on the right). The “Shortcut functions” section
provides check boxes that allow the selection of the shortcut and definition of the
relative parameter:
7-11-2
Output scenarios
The assignment of the activation shortcut of an output scenario to the activation and
deactivation trigger of each event can be done via the SmartLeague software program
only.
The SmartLiving control panel provides 50 output scenarios, each with a maximum of
10 outputs.
Programming occurs in two phases: the first is the definition of the scenarios, the
second is the assignment to the activation and restoral of the event.
SCENARIO DEFINITIONS
From the system tree menu on the left, select the “Events” option, the “Output
Scenarios” list will appear in the “Programming” section on the right.
There are 50 scenarios available in the list. Selecting one of them will allow you to use
the programming area, alongside the list, to configure each of the 10 outputs available.
OtherOutputsProg
SmartLiving System - Events Parameters settings - Outputs
SIA Codes
SmartLiving System - Events - select the event type
Programming - Digital Dialer
Siren sound types
SmartLiving System - Siren pattern
SMS message number/index
Parameters settings - Nexus
Table 7-9:
Events - via SmartLeague
Option Part of the system Template/section
Table 7-10:
Shortcut on event
Shortcuts Function Option
Activate scenario
Shortcut that activates the scenario selected in the check box along-
side.
One of the 30 shortcuts available
Activate output
Shortcut that activates the scenario selected in the check box along-
side.
One of the configured outputs
Deactivate output
Bypass zone
Shortcut that deactivates/activates the zone selected in the check box
alongside.
One of the configured zones
Unbypass zone
Disable code
Shortcut that deactivates/activates the code selected in the check box
alongside.
One of the available codes
Enable code
Disable key
Shortcut that deactivates/activates the key selected in the check box
alongside.
One of the available keys
Enable key
Activate thermostat
Shortcut that activates the keypad thermostat in the operating mode
selected in the check box alongside.
One of the keypads available
Thermostat operating mode
Deactivate thermostat
Shortcut that deactivates the keypad thermostat selected in the check
box alongside.
One of the keypads available
Dimmer up
Shortcut that increases/decreases the set value of the voltage supplied
to the dimmer output selected in the check box alongside.
One of the outputs configured as
dimmer
Dimmer down
Delete alarm memory
Shortcut that deactivates the outputs relative to zone/partition alarm
and tamper events and deletes the partition and system alarm and
tamper memories.
This shortcut operates on the partitions selected for the scenario.
One of the 30 shortcuts available
To Next Page
Loading...
