Innovative Technology NV9 - 4.2 Bezel Mounting

<< Back to Contents
Copyright © Innovative Technology Ltd 2018 Doc: NV9 Range User Manual
Version: 1.0
Page 19 of 63
4.2 Bezel Mounting
4.2.1 Bezel Fitting
1. Locator lugs
Place bezel down onto
validator, ensuring
locating lugs go into
spaces provided (1).
2. Lock bezel in place
Slide bezel backwards
until you hear release
latch arm, click into
place.
4.2.2 Bezel Removal
1. Release clips
Pull release clip upwards (1)
With release clip held upwards,
you can pull bezel towards front
of unit (2).
2. Lift Bezel
Now bezel is free of locating
lugs, lift bezel upwards (3).