<< Back to Contents
Copyright © Innovative Technology Ltd 2018 Doc: NV9 Range User Manual
Version: 1.0
Page 30 of 63
The play button will turn GREEN if the download has been completed successfully. If
for whatever reason there is an error, the play button will turn RED and the
download method LED will be flashing an error code for further diagnosing. A table
of error codes can be found below:
1 Long flash followed by –
5.4.2.4 SMART Update DA3
The DA3 also has a feature called SMART Update, which provides all applicable
dataset files for a given currency across our entire product range, into a single file.
Differences from standard DA3:
- SMART Update firmware required on DA3
- SD card with download file, inserted into slot A
- SMART Update method only updates the file on the validator, no settings can
be changed.
Our complete SMART Update package, along with full information guide can be
downloaded from our software section on our website.
5.4.3 Remote Updates
5.4.3.1 General Description
The NV9 range of products all support remote update, which is the ability to send an
update file via protocol commands. This means that you do not physically have to be
stood at the machine, as the host initiates the download via the protocol.
5.4.3.2 Software Requirements
Remote update relies on a series of packets to be transmitted to the validator and
thus only the serial protocols such as SSP and ccTalk allow this feature.
Details of how this is implemented can be found in our SSP implementation guide
(GA00973).
You will have to check with the machine manufacturer as to whether this is a feature
their software supports.
To Next Page
Loading...
