Intel Desktop Board D815EEA2/D815EPEA2 Technical Product Specification
106
3.7 Recovering BIOS Data
Some types of failure can destroy the BIOS. For example, the data can be lost if a power outage
occurs while the BIOS is being updated in flash memory. The BIOS can be recovered from a
diskette using the BIOS recovery mode. When recovering the BIOS, be aware of the following:
• Because of the small amount of code available in the non-erasable boot block area, there is no
video support. You can only monitor this procedure by listening to the speaker or looking at
the diskette drive LED.
• The recovery process may take several minutes; larger BIOS flash memory devices require
more time.
• Two beeps and the end of activity in the diskette drive indicate successful BIOS recovery.
• A series of continuous beeps indicates a failed BIOS recovery.
To create a BIOS recovery diskette, a bootable diskette must be created and the BIOS update files
copied to it. BIOS upgrades and the Intel Flash Memory Upgrade utility are available from Intel
Customer Support through the Intel World Wide Web site.
✏
NOTE
If the computer is configured to boot from an LS-120 diskette (in the Setup program’s Removable
Devices submenu), the BIOS recovery diskette must be a standard 1.44 MB diskette not a 120 MB
diskette.
For information about Refer to
The BIOS recovery mode jumper settings Section 2.9.2, page 82
The Boot menu in the BIOS Setup program Section 4.7, page 130
Contacting Intel customer support Section 1.3, page 19
To Next Page
Loading...
Need help?
General
