To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Intel S2600WF and is the answer not in the manual?
General| Memory Slots | 16 DIMM slots |
|---|---|
| Chipset | Intel C621 |
| Memory Support | DDR4 ECC RDIMM/LRDIMM |
| Expansion Slots | Up to 6 PCIe 3.0 slots |
| Storage Options | SATA, SAS |
| SATA Ports | Up to 10 SATA ports |
| CPU Socket Type | Socket P (LGA 3647) |
Disclaimer regarding server board usage, airflow requirements, and operating limits.
Information on product deviations from specifications discovered after production.
Lists the features and specifications for the S2600WF product family server boards.
Identifies key components and features on the server board layout.
Provides keepout zones and component position details for mechanical integration.
Describes the server board's architecture, features, and subsystem interconnects.
Details the system software components including BIOS, BMC firmware, and OS data.
Lists keyboard shortcuts recognized during the Power-On Self-Test (POST) process.
Explains the PHM components and processor socket for installation.
Details processor TDP support and thermal management requirements for reliability.
Overview of Intel Xeon Scalable family processors supported by the server board.
Features of Xeon Scalable processors with integrated Omni-Path Fabric.
Guidelines for installing processors, including single and dual-processor configurations.
Summarizes mixed processor configurations and BIOS error handling.
Describes the memory subsystem, supported types, and channel configuration.
Lists supported DDR4 RDIMM and LRDIMM types and specifications.
Explains DIMM slot identification and rules for population.
Provides guidelines for DIMM population to achieve optimal performance.
Details Memory Reliability, Accessibility, and Serviceability (RAS) features.
Explains DIMM population rules and BIOS setup for Memory RAS.
Describes how BIOS assigns PCI bus numbers and resources.
Explains the PCIe Non-Transparent Bridge for high-performance communication.
Overview of Intel QAT and its support on the S2600WFQ SKU.
Details support for PCIe add-in cards via riser slots.
Describes available riser card options for slots #1 and #2.
Information on supported Intel Ethernet Network Adapters for OCP.
Details support for Intel Integrated RAID modules and adapters.
Overview of onboard storage technologies including M.2, OCuLink, VMD, VROC, and SATA.
Describes onboard OCuLink connectors for NVMe SSDs.
Explains Intel VMD for managing PCIe NVMe SSDs and hot-plug support.
Details Intel VROC for NVMe boot on RAID and volume management.
Information on onboard AHCI SATA controllers and port support.
Overview of rear RJ45 connectors for management, network, and serial ports.
Details support for two serial ports, Serial-A and Serial-B.
Describes onboard USB connectors including external and front panel options.
Information on the integrated graphics controller and supported video resolutions.
Identifies and describes onboard power connectors for main and auxiliary power.
Details front panel connectors for buttons, LEDs, and system status indicators.
Describes connectors for system fans, including fixed mount and hot-swap types.
Identifies management interface connectors like IPMB and SMBUS.
Details the dedicated 1GbE RJ45 management port for system control.
Overview of the BMC's embedded web server for manageability features.
Explains advanced management features enabled by the RMM4 Lite add-on.
Details KVM redirection over LAN for remote server control and management.
Describes the blue system ID LED for server identification.
Explains the bi-color system status LED indicating server health.
Details LED indicators for BMC boot and reset process status.
Describes POST code diagnostic LEDs for troubleshooting system hangs.
Identifies fan fault LEDs for indicating fan failures.
Describes memory fault LEDs for indicating DIMM issues.
Identifies CPU fault LEDs for detecting CPU incompatibility.
Details password configuration for BIOS setup and system access.
Explains how to disable front panel power and reset buttons.
Information on TPM hardware security for boot process integrity.
Details Intel TXT for secure computing environments and hardware-rooted trust.
Instructions for resetting BIOS options to factory defaults.
Procedure for clearing administrator and user passwords via a jumper.
Guidance on using a jumper for forced Intel ME firmware updates.
Instructions for using a jumper to force BMC firmware updates.
Explains how to use a jumper for BIOS recovery from corruption.
Outlines features supported by the integrated BMC firmware.
Details platform management features like power control and ACPI.
Describes various power control sources for system power-up/down.
Details supported ACPI power states for system management.
Describes system initialization steps for BIOS and BMC.
Explains BMC sensor monitoring and reporting of system health.
Details fan control, redundancy detection, and thermal management.
Describes memory thermal management and throttling mechanisms.
Lists MRC diagnostic codes for memory initialization during POST.
Provides a list of BIOS POST progress codes for troubleshooting.
Lists beep codes used by BIOS to report error conditions during POST.
Overview of features for the R1000WF product family servers.
Overview of features for the R2000WF product family servers.
