Intel S5500WB - LAN Connector Ordering; Integrated Baseboard Management Controller

Intel® Server Board S5500WB TPS Functional Architecture
Revision 1.3
Intel order number E53971-004
31
• NIC 2 MAC address – Assigned the NIC 1 MAC address +1
• Integrated BMC LAN Channel MAC address – Assigned the NIC 1 MAC address +2
• Intel
®
Remote Management Module 3 (Intel
®
RMM3) MAC address – Assigned the
NIC 1 MAC address +3
The Intel
®
Server Board S5500WB has a white MAC address sticker included with the board.
The sticker displays the NIC 1 MAC address in both bar code and alphanumeric formats.
3.8.2 LAN Connector Ordering
The Intel
®
82576 NIC is connected to a stacked RJ-45 over USB mag-jack for NIC 1 and a RJ-
45 mag-jack for the second connection (NIC 2).
3.9 Integrated Baseboard Management Controller
The ServerEngines* LLC Pilot II Integrated BMC is provided by an embedded ARM9 controller
and associated peripheral functionality that is required for IPMI-based server management.
Firmware usage of these hardware features is platform-dependant.
The following is a summary of the Integrated BMC management hardware features used by the
ServerEngines* LLC Pilot II Integrated BMC:
• IPMI 2.0 Compliant
• Integrated 250 MHz 32-bit ARM9 processor
• Six I
2
C SMBus modules with Master-Slave support
• Two independent 10/100 Ethernet Controllers with RMII support
• Six I
2
C interface
• Memory Management Unit (MMU)
• DDR2 16-bit up to 667 MHz memory interface
• Up to 16 direct and 64 Serial GPIO ports
• 12 10-bit Analog to Digital Converters
• Eight Fan Tachometers Inputs
• Four Pulse Width Modulators (PWM)
• Chassis Intrusion Logic with battery-backed general purpose register
• JTAG Master interface
• Watchdog timer
Additionally, the ServerEngines* Pilot II part integrates a super I/O module with the following
features:
• Keyboard Style/BT Interface
• Two 16C550 compatible serial ports
• Serial IRQ support
• 16 GPIO ports (shared with Integrated BMC)