Figure E-16. Bolster Plate, Insulator
13
4
5678
B
C
D
A
123
4
5678
B
C
D
A
B
.1 A
2200 MISSION COLLEGE BLVD.
P.O. BOX 58119
SANTA CLARA, CA 95052-8119
R
.24 A B
.1 AB
B
.1 A
2X 32
2X 26
WITH ADHESIVE APPLIED 3
0.18
+0.05
-0.02
2X 108.7
61
2X 87.5
4X 5 0.25
44
35
13
3X 5 0.25
81.7
2X 44
2X 70
A
G93729 1 09
DWG. NO SHT. REV
SHEET 1 OF 1
DO NOT SCALE DRAWING
SCALE: 2:1
09G93729D
REV
DRAWING NUMBER
SIZE
KNL BOLSTER PLATE INSULATOR
TITLE
DEPARTMENT
SEE NOTESSEE NOTES
FINISHMATERIAL
-
DATEAPPROVED BY
2/20/14
DATECHECKED BY
8/16/13
DATEDRAWN BY
8/16/13
DATEDESIGNED BY
DIMENSIONS ARE IN MILLIMETERS.
THIRD ANGLE PROJECTION
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPR
- 01 TOOLING RELEASE 9/5/14
02 MODIFIED OUTER PERIMETER DIMENSION. CREATED NEW -002 PART. 09/12/14
03
1. CHANGED LOCATION OF DATUM B AND ELIMINATED DATUM C.
2. UPDATED NOTE 2.
12/08/14
04 UPDATED NOTES AND GD & T DIMENSIONING. 3/27/15
05 ADDED CALL OUT FOR CRITICAL TO FUNCTION DIMENSIONS. 4/23/15
PG1 C5
PG1 C7
06 1. REMOVED THE CTF SYMBOL OFF DIMENSIONS BUT THE HOLE DIAMETER. 5/21/15
C6 07
1. CHANGED THE FOUR CENTER HOLE DIAMETERS FROM 5.0MM TO 3.8MM.
2. ROLLED THE PART NUMBER FROM G93729-002 TO G93729-003.
10/7/15
08
1. CHANGED THE CENTER HOLE DIAMTERS BACK TO 5.0MM SO
SUPPLIERS WOULDN'T HAVE TO MODIFY THE TOOLING.
2. WILL REVERT BACK TO THE PREVIOUS PART NUMBER, G93729-002.
10/15/15
C6 09 1. REMOVED CTF DIMENSION. 7/11/16
NOTES, UNLESS OTHERWISE SPECIFIED:
1. REFERENCE DOCUMENTS:
ASME Y14.5M-2009 - STANDARD DIMENSION AND TOLERANCES
2. FEATURES NOT SPECIFIED ON DRAWING AND FEATURES WITHOUT SPECIFIED TOLERANCE SHALL BE CONTROLLED
BY 3D CAD DATABASE. FOR FEATURES NOT EXPLICITLY TOLERANCED:
(BASIC DIMENSIONS FROM THE 3D CAD MODEL)
3 MATERIAL: MAY USE INTEL ENGINEERING APPROVED EQUIVALENTS.
A) TYPE: HALOGEN FREE POLYCARBONATE SHEET PC-1860B (CHENGDU KANGLONGXIN PLASTICS CO,.LTD.)
0.127MM NOMINAL THICKNESS, ONE SIDE ADHESIVE APPLIED (NIKTO 8905); TOTAL THICKNESS= 0.18MM.
B) CRITICAL MECHANICAL PROPERTIES:
-FLAMMABILITY: UL 94-V0 OR VTM-0 RATING.
4 APPLY ADHESIVE TO THE TOP SIDE
5. DIMENSIONS MARKED ARE CRITICAL TO FUNCTION DIMENSIONS (CTF).
4
C
C
PARTS LIST
DESCRIPTIONPART NUMBER
ITEM NO
QTY
KNL BOLSTER PLATE INSULATORG93729-002TOP
To Next Page
Loading...
Need help?
General
