EasyManua.ls Logo

Intelbras TI 5000 - Page 64

Intelbras TI 5000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
To unlock the keyboard, simply press the * key for 3 seconds. The message will appear:
Unlocked terminal keyboard
Note: while the terminal is on a call, the keyboard will unlock.
Consulting the conguration of the programmable keys of the terminal and the modules
For a query about the conguration of a programmable key you must enter the
Key Conguration
menu, choose the
key you want to query and navigate to the
Verify
key conguration option. Upon entering this option, a message will
be displayed with the programming of the selected key. If the key has no conguration, the following message will be
displayed:
Programmable key without conguration
The rst time the modules are connected to the terminal, their keys will be congured as an extension according to the
installed capacity in the exchange.
Audible alerts (beeps) emitted by the terminal
Off-hook handset
Occurs when the user takes the handset off the hook to perform an operation and, at the end of the operation, forgets the
phone off-hook (receiving busy tone from the PABX). After 5 seconds in the busy state, the PBX stops sending the tone,
leaving it muted. This new state (mute) receives the name of inoperative extension and, after 2 minutes in this condition,
the terminal starts to generate a beep every 3 seconds, in order to warn about this condition.
Note:
factory default,
Mute.
Pressed key
Occurs whenever a key is pressed.
Reminder
Indicates a reminder programmed by the user for the current time. The reminder beep has the following construction: there
are four successive beeps followed by a pause, and this cadence is repeated twenty times.
Message
Messages received from the PABX and others generated by the terminal itself will be notied through beeps that occur as
soon as the message appears on the display.
Note: » The volume of each of the beeps is set in the conguration menu.
»
When the terminal is in environment monitoring no beep will be generated.
»
When the terminal is programming, phone book or calling, the only possible beeps will be: key pressed beep,
reminder beep, or message beep.

Table of Contents

Other manuals for Intelbras TI 5000