OW70L-Dac - OneWeb LEO User Terminal
60
11.4 Appendix D. Using a lifting strap
When you install the antenna unit to the mounting plate (or other surfaces), you can use the lifting strap.
To use the lifting strap, Refer to pictures below. (A separate purchase of the lifting strap is required.)
Make sure that before installing the lifting strap on the antenna, has plenty of room.
1. Prepare the lifting strap.
2. Wrap the antenna up using the
lifting straps.
3. Arrange the straps to locate the
holder is the top of the antenna.
4. Remove a pin from a
shackle on the strap.
5. Clip the opposite side's strap onto
the shackle.
6. Fully tighten the lifting strap and
secure the shackle with the pin.
7. Re-wrap the holder
and shackle with the
protection.
8. Ready to lift the antenna.
7
7
6
6
3