Installing Above Deck Unit (ADU)
21
5.4 Placing Antenna on NPM (Non-Penetrating Mount)
5.4.1 Assembling Base Panel of NPM
Check the requirement tools before assembling the NPM
FASTENERS TOOLS
HARDWARE
IT EM
DESCRIPT ION
DESCRIPT ION DESCRIPT ION DESCRIPT ION
DESCRIPT ION DESCRIPT ION
DESCRIPT ION
1
2
8
4
Mounting Base(#A)
Mast Pole(# B)
Suppo rt Plate(#D)
Side Supporting Rods(# C)
A
B
C
D
Ground M ounting Base(#E)
E
2
2
D
5
6
3
B
5
6
5
Adjust the width along with mast pole (#B) and
tighten the screws. (suggest torque 12.5 N-m,Max
torque 21.4 N-m)
Loose8
screws
1. Assemble 3 mounting bases with the bolts kits.
5/16"-18*5/18" Round
Flat head screw (2 ea),
5/16"-18 washer (2 ea),
Nylon nut (2 ea)
2. Assemble 4 support plates with the bolt kits.
Loosen 8 screws
5/16"-18*7/8" Round (16 ea).
flat head square screw (16 ea),
5/16"-18 washer (16 ea),
Nylon nut (16 ea)
To Next Page
Loading...
Need help?
General
