Intermec EasyCoder PD41 User Manual

EasyCoder PD41 Printer User’s Guide 95
F
Options
This appendix describes the options that add functionality to
your EasyCoder PD41 Printer. For a complete description and
installations instructions, see the respective installation
instructions document for each kit. Please note that several of
these options can only be factory-fitted or installed by an
authorized service technician. This appendix covers the following
topics:
•EasyLAN Ethernet
• Parallel IEEE 1284 Interface
• Cutter
• Internal Rewinder and Batch Takeup
• Printhead Kit (203 or 300 dpi)

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g