Chapter 5 — Setting up the Printer
EasyCoder PD41 Printer User’s Guide 51
Upgrading Firmware
The www.intermec.com web site contains the latest software that
you can download for free.
To download firmware updates
1 Visit the Intermec web site at www.intermec.com.
2 Click Service & Support > Downloads.
3 In the Select a Product field, choose the EasyCoder PD41
and you will be presented with the latest software available.
4 Download the latest firmware version to your computer.
5 Extract the zip file to a folder on your computer. Normally,
three versions of the firmware are included with the following
differences and naming convention:
• No suffix: Normal firmware upgrade.
• FD suffix: Firmware upgrade resetting Factory Default.
Only applicable when upgrading through a Compact
Flash card.
• NU suffix: Boots with new firmware, yet printer returns to
previous firmware version on reboot (No Upgrade). Only
applicable when upgrading through a Compact Flash
card.
To upgrade the downloaded firmware to your printer, use any one of the
following methods:
• Use PrintSet 4 and follow the firmware upgrade procedure.
• If you have a network connection, browse to the printer’s
home page (see Chapter 2, “Network connection”), and select
Maintenance. Upload the firmware file.
• Copy the firmware binary file to a CompactFlash card. Turn
the printer off, insert the card into the printer’s
CompactFlash socket and switch on the printer. The printer
will be upgraded automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
