Intermec EasyCoder PD41 User Manual

Chapter 1 — Getting Started
4 EasyCoder PD41 Printer User’s Guide
Product Identification
The machine and serial number labels are attached to the
printer’s rear plate, and contain information on type, model and
serial number as well as AC voltage and frequency.
Front View
EasyCoder PD41: Front view
The discharge of electrostatic energy accumulated
on the human body, clothing, or other surfaces can
damage or destroy the printhead or electronic
components used in this printer. Avoid touching
the electrical connectors while unpacking and
setting up the printer.
Print
Button
Control
LEDs
Side door

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g