Intermec EasyCoder PD41 User Manual

EasyCoder PD41 Printer User’s Guide iii
Contents
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . vii
Global Services and Support . . . . . . . . . . . . . . . . viii
Warranty Information . . . . . . . . . . . . . viii
Web Support . . . . . . . . . . . . . . . . . . . . viii
Telephone Support . . . . . . . . . . . . . . . viii
Who Should Read This Manual . . . . . . . . . . . . . . ix
Related Documents . . . . . . . . . . . . . . . . . . . . . . . ix
1
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Description of EasyCoder PD41. . . . . . . . . . . . . . . . . . . . . .2
Unpacking the Printer . . . . . . . . . . . . . . . . . . . . . .2
Product Identification. . . . . . . . . . . . . . . . . . . . . . .4
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Controls and Indicators . . . . . . . . . . . . . .5
Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Media Compartment . . . . . . . . . . . . . . . . . . . . . . .7
Print Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Fingerprint and IPL . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting the Printer to your System. . . . . . . . . .9
Connecting the Printer through the USB
interface . . . . . . . . . . . . . . . . . . . . . . .9
Connecting the Printer through the Serial
Port. . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting the Printer to a Network. . . .9
Connecting the Printer through the Parallel
Port. . . . . . . . . . . . . . . . . . . . . . . . . .10
Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . .10
2
Operating the Printer . . . . . . . . . . . . . . . . . . . . . .13
Loading Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Tear-Off (straight-through) Operation . . . . . . . . .14
Tear-Off. . . . . . . . . . . . . . . . . . . . . . . . .14
Peel-Off (Self-Strip) Operation . . . . . . . . . . . . . . .17
Peel-Off . . . . . . . . . . . . . . . . . . . . . . . . .17
Loading Thermal Transfer Ribbon . . . . . . . . . . . .20
Loading Ribbon . . . . . . . . . . . . . . . . . . .20

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g