Intermec EasyCoder PD41 User Manual

iv EasyCoder PD41 Printer User’s Guide
LED indicators and the Print Button . . . . . . . . . . . . . . . . . 23
LED indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Print Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3
Maintaining the Printer . . . . . . . . . . . . . . . . . . . 27
General Maintenance Advice . . . . . . . . . . . . . . . . . . . . . . . 28
Printhead Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Internal Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
External Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Printer Operation Problems . . . . . . . . . . . . . . . . . . . . . . . . 32
Print Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Ready-to-Work™ Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 34
Ready-to-Work LED Flashing or Off . . . . . . . . . . 34
Troubleshooting Adjustments . . . . . . . . . . . . . . . . . . . . . . . 34
Ribbon Wrinkling Adjustments . . . . . . . . . . . . . . 34
Clearing Media Jams . . . . . . . . . . . . . . . . . . . . . . 35
Printhead Adjustments. . . . . . . . . . . . . . . . . . . . . 36
Label Gap Sensor Adjustments. . . . . . . . . . . . . . . 39
5
Setting up the Printer. . . . . . . . . . . . . . . . . . . . . . 41
The Printer Startup Sequence . . . . . . . . . . . . . . . . . . . . . . . 42
Changing Configuration Settings . . . . . . . . . . . . . . . . . . . . 44
Using PrintSet 4. . . . . . . . . . . . . . . . . . . . . . . . . . 44
Using the Printer’s Home Page . . . . . . . . . . . . . . . 44
Using the Command Line . . . . . . . . . . . . . . . . . . 44
Running Testmode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Testmode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Extended Testmode . . . . . . . . . . . . . . . . . . . . . . . 47
Upgrading Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g