Intermec EasyCoder PD41 User Manual

EasyCoder PD41 Printer User’s Guide 27
3
Maintaining the
Printer
This chapter explains basic maintenance of the printer. By
following the instructions in this chapter you avoid common
problems, and increase the lifetime of your printer. This chapter
covers the following topics:
• General Maintenance Advice
• Printhead Cleaning
• Internal Cleaning
• External Cleaning

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g