Intermec EasyCoder PD41 User Manual

Appendix B — Media Specifications
EasyCoder PD41 Printer User’s Guide 59
The media supply must not be exposed to sand, dust, grit etc.
Any hard particles, no matter how small, can damage the
printhead.
Ribbon Size
The core of the ribbon must be 25.2-25.6 mm (1 inch), as the
empty ribbon core included in the box. The outer dimensions of
the ribbon roll may be:
Max. diameter 76 mm 2.99 inches
Max. width 110 mm 4.33 inches
Min. width 30 mm 1.18 inches

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g