Intermec EasyCoder PD41 User Manual

Chapter 2 — Operating the Printer
16 EasyCoder PD41 Printer User’s Guide
Tear-Off, continued
7
Route the media through the print
mechanism.
8
If using fan-fold media, load it
through the rear intake and route the
media the same way as a media roll.
9
Reset the label feed guide and the
printhead lever.
10
Close the side door. Press the Print
button to advance the media.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g