Intermec EasyCoder PD41 - Troubleshooting

Chapter 2 — Operating the Printer
EasyCoder PD41 Printer User’s Guide 21
Loading Ribbon, continued
3
Push the ribbon roll onto the right
ribbon hub, and the empty ribbon
core on the left hub.
4a
In case you are using ink-out ribbon,
route the ribbon as shown here.
4b
In case you are using ink-in ribbon,
route the ribbon as shown in this
figure.
5
Move the ink-position lever to the left
for ink-out ribbon, and to the right for
ink-in ribbon.