Intermec EasyCoder PD41 User Manual

Chapter 3 — Maintaining the Printer
30 EasyCoder PD41 Printer User’s Guide
Use a soft cloth, possibly moistened with water or a mild
detergent when cleaning the printer externally. Make sure to keep
the surface surrounding the printer clean as well.
If the printer is used in an environment where the
premises are cleaned by a water hose or steam,
move the printer to another room or cover it very
carefully with a plastic sheet and make sure that the
power cord is unplugged.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g