Intermec EasyCoder PD41 User Manual

Appendix A — Technical Data
56 EasyCoder PD41 Printer User’s Guide
Sensors
Label Gap/Black Mark/
Out of Media
Yes
Printhead Lifted Yes
Label Taken Yes
Ribbon End Yes
Controls
LED indicators 4: Power, Data/Ready, Error, Ready-to-Work
Keys One
Electronics
Micropocessor ARM 9
Standard Memory 4 MB Flash, 8 MB SDRAM.
Interfaces
RS-232 Serial Yes
USB Yes
Ethernet Yes/Option
IEEE 1284 Parallel Yes/Option
CompactFlash Yes
Accessories and Options
Internal Rewinder and Batch Takeup
Cutter
Printhead 203/300 dpi
EasyLAN Ethernet Interface
Parallel IEEE 1284 Interface
Printer Specifications Table

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g