Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
90 IF61 Fixed Reader User’s Manual
To enable Avalanche
1 From the menu, click Network Configuration > Device
Management. The Device Management screen appears.
2 Check the Enable Avalanche Access check box to enable
Avalanche.
3 In the Avalanche Agent Name entry field, enter the IP
address or DNS name of the Avalanche console. Or, leave this
field blank and the IF61 sends a broadcast request looking for
any available agent.
4 Click Activate Changes to save your changes and
immediately make the changes active.
To Next Page
Loading...
