Chapter 2 — Configuring Network Settings
IF61 Fixed Reader User’s Manual 21
To configure Ethernet settings
1 From the menu, click Network Configuration or Ethernet
in the left-hand pane. The Ethernet screen appears.
If DHCP is enabled, you see this screen:
If DHCP is disabled, the current values for IP address, subnet
mask, and router appear in entry fields:
2 Configure the Ethernet settings. For help, see the next table.
Note: The IF61 Ethernet connection must not be on the same
subnet as the 802.11 wireless connection or errors may result.
Note: Different settings appear in this screen depending on
the current DHCP mode for the IF61.
To Next Page
Loading...
