INVT Goodrive350 IP55

Goodrive350 IP55 High-ingress Protection Series VFD Function parameter list
-163-
Function
code
Name
Description
Default
value
Modify
49: Programmable card customized fault 5
(P-E5)
50: Programmable card customized fault 6
(P-E6)
51: Programmable card customized fault 7
(P-E7)
52: Programmable card customized fault 8
(P-E8)
53: Programmable card customized fault 9
(P-E9)
54: Programmable card customized fault 10
(P-E10)
55: Repetitive expansion card type fault (E-Err)
56: Encoder UVW loss fault (ENCUV)
57: Profibus communication fault (E-PN)
58: CANopen communication fault (SECAN)
59: Motor over-temperature fault (OT)
60: Card slot 1 card identification failure (F1-Er)
61: Card slot 2 card identification failure (F2-Er)
62: Card slot 3 card identification failure (F3-Er)
63: Card slot 1 card communication timeout fault
(C1-Er)
64: Card slot 2 card communication timeout fault
(C2-Er)
65: Card slot 3 card communication timeout fault
(C3-Er)
66: EtherCAT communication fault (E-CAT)
67: Bacnet communication fault (E-BAC)
68: DeviceNet communication fault (E-DEV)
69: Master-slave synchronous CAN slave fault
(S-Err)
70: EC PT100 detected overheating (OtE1)
71: EC PT1000 detected overheating (OtE2)
72: EtherNet/IP communication timeout (E-EIP)
73: No upgrade bootload (E-PAO)
74: AI1 disconnected (E-AI1)
75: AI2 disconnected (E-AI2)
76: AI3 disconnected (E-AI3)
P07.33
Running
frequency at
present fault
0.00Hz–P00.03
0.00Hz
●
P07.34
Ramp reference
frequency at
present fault
0.00Hz–P00.03
0.00Hz
●
P07.35
Output voltage
at present fault
0–1200V
0V
●