EasyManua.ls Logo

iTAS PAMSPAN501x - 2 Hardware Setup and Startup

iTAS PAMSPAN501x
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAMSPAN501x G.SHDSL.bis EFM Gateway
6
Maintenance
Firmware upgradeable via FTP or TFTP (optional)
Support Telnet
Support ATM OAM F5 End to End and Segment loop
backs
Statistics on DSL link and data ports
Sys-log
HTTP web downloadable
Support 8 PVCs
NAT/PAT support
DHCP client/server and DHCP relay functionality
Support IGMP Snooping
DMZ support
Support Port-based VLAN
Management LED
LED indicator; power, DSL links, Alarm, Ethernet ports
and CO/CPE mode
Hardware Interface
DSL interface: 2/4 wires one RJ-11 jack. 8 wires two
RJ-11 jacks
Ethernet interface: four RJ-45 jack; 10/100BaseT auto
sensing and crossover
AC power adapter (100VAC ~ 240VAC, 50-60Hz)
One craft Interface for local console access (CID)
Dimensions & Weight
Dimensions: 35mm(H)×210mm(W)×193mm(D)
Weight: 914g
Operating Requirements
Password protection
PAP and CHAP support
Remote access management via telnet
SNMPv1/SNMPV2
Firewall Security
Packet Filter
Denial of Service
Stateful Packet Inspection (SPI)
Attack Alert and log
Access Control
Real time log
MIB-II (RFC 1213, RFC 1573)
Web based GUI
Command Line Interface (CLI)
Operating temperature: 0C to +50C
Operating humidity: 5% to 90% RH non-condensing
Power Consumption for 2-pair is 5.6W and 4-pair is
5.8W

Table of Contents