iTAS PAMSPAN501x - Spanning tree configuration; 3.2.4.3.1 Spanning Bridge Configuration

PAMSPAN501x G.SHDSL.bis EFM Gateway
-87
3.2.4.3.1 Spanning Bridge Configuration
The following shows the Spanning Bridge configurations settings.
The following Spanning Bridge information will be displayed and allows users to
configure:
1. Spanning: spanning tree setting (true or false)
2. Priority: spanning tree priority value
3. Forward Delay: spanning tree forward delay time (seconds)
4. Hello time: spanning tree hello time (seconds)
5. Maximum Age: spanning tree maximum age (seconds)
3.2.4.3.2 Interface Configuration
Click Interface configuration and then the Bridge Interfaces page will be displayed,
as shown in the following figure.