PAMSPAN501x G.SHDSL.bis EFM Gateway
5
CO and CPE Mode selectable
Provides point-to-point connectivity
2-wire/4-wire/6-wire/8-wire EFM bonding or ITU-T G.bonding Mode selectable
Offers flexible rate options
Easy Management
Support both web-based GUI and CLI-based management.
Backward Compatible to G.SHDSL (G.991.2)
1.3 Application
1.4 Specification
Standard Compliance Protocol
ITU-T G.991.2
Transmission rate up to 5.69 Mbps on 2-wire
Transmission rate up to 11.38 Mbps on 4-wire
Transmission rate up to 17.07 Mbps on 6-wire
Transmission rate up to 22.76 Mbps on 8-wire
Support of Annex A, Annex B, Annex F, and
Annex G
Auto load balancing with bonded pairs
Support point-to-point configuration
Manual or auto rate selectivity
Comply IEEE 802.3ah-2004
ITU-T G.994.1
Support EFM over G.SHDSL.bis and G.SHDSL
Support ATM over G.SHDSL.bis and G.SHDSL
MAC bridging (IEEE 802.3ah-2004 and 802.1D)
PPPoE (RFC 2416)
RFC 1483/2684 Bridged encapsulation (routing mode
optional)
IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP
IEEE802.1P Priority Output Queuing
IEEE 802.1Q VLAN
IEEE802.3u Fast Ethernet 100BaseT
MAC Filtering
QoS support VBR-rt, VBR-nrt, CBR and UBR
To Next Page
Loading...