ITech IT-M7700 Series - Page 124

Programming Examples
Copyright© Itech Electronic Co., Ltd. 112
2,"0,0,100.0,100.0,0.0,50.0,1,0.0,180.0,1,1,1,2"
->LIST:RECOrder
3,"0,2,100.0,90.0,0.0,50.0,1,0.0,180.0,1,1,1,2"
->LIST:RECOrder
4,"0,3,100.0,80.0,0.0,50.0,1,0.0,180.0,1,1,1,2"
->LIST:RECOrder
5,"0,4,10.0,70.0,0.0,50.0,1,0.0,180.0,1,1,1,2"
-> LIST:SAVE 1
-> LIST:STATe 0
View List File
Before selecting and running the list program, you can view the related
parameters and each step of the existed list program. The operation steps to
view the list program are as follows.
Please enter the following command:
-> SYSTem:REMote
-> LIST:STATe 1
-> LIST:CONFigure?