janitza UMG 804 User Manual

UMG 804 www.janitza.com
78
1. Access the HTML console of the UMG 804
using a browser and the IP address of the
UMG 804.
2. Insert USB fl ash drive that contains unzipped
fi les into the UMG 804 USB port.
3. Under the “Confi guration” tab select “System”.
4. Select “Update Firmware”.
5. Select “continue” - the process will take around
30-60 seconds.
6. After 60 seconds the browser should auto re-
fresh with the update; if not refresh, press (F5).
7. Go to Main Status Page and confi rm that new
F/W version loaded.
1.126
BCMS Main Hall

janitza UMG 804 Specifications

General

Brand	janitza
Model	UMG 804
Category	Measuring Instruments
Language	English