Section A - Attachments
Hoses and Couplings
Quick Release Couplings
A-2 A-2
9803/9340-8
Connecting Quick Release Couplings
1 Remove any residual hydraulic pressure trapped in
the service line hose.
2 Wipe the two faces of the male and female couplings
and make sure they are clean.
3 Make sure that ball 1-C in the female coupling is
located in one of its slots.
4 Fit the male coupling into the female coupling; To
ensure that the coupling is not accidentally released,
rotate sleeve 1-E half a turn and make sure that the
locking ball 1-C does not align with the slot 1-D.
Disconnecting Quick Release Couplings
1 Remove any residual hydraulic pressure trapped in
the service line hose.
2 Align the slot 1-D with ball 1-C.
3 Pull back sleeve 1-E to release the coupling.
Fig 1.
To Next Page
Loading...
