Section 3 - Maintenance
Routine Maintenance
Checking the ROPS/FOPS Structure
3-20 3-20
9803/9340-8
Checking the ROPS/FOPS Structure
!MWARNING
You could be killed or seriously injured if you operate
a machine with a damaged or missing ROPS/FOPS. If
the Roll Over Protection Structure (ROPS)/Falling
Objects Protection Structure (FOPS) has been in an
accident, do not use the machine until the structure
has been renewed. Modifications and repairs that are
not approved by the manufacturer may be dangerous
and will invalidate the ROPS/FOPS certification.
INT-2-1-9_6
1 Check the structure for damage.
2 If necessary, have the structure repaired by suitably
qualified personnel (consult your JCB distributor).
3 If the damage is severe it will be necessary to obtain
a complete new structure.
To Next Page
Loading...
