Section 3 - Maintenance
Routine Maintenance
Loader Arm Safety Strut
3-21 3-21
9803/9340-8
Loader Arm Safety Strut
!MWARNING
Never walk or work under raised equipment unless it
is supported by a mechanical device. Equipment
which is supported only by a hydraulic device can
drop and injure you if the hydraulic system fails or if
the control is operated (even with the engine stopped).
13-2-3-7
Installing the Safety Strut
!MWARNING
You could be killed or seriously injured if the loader
control is accidentally operated. Make sure that no-
one goes near the machine whilst you fit the safety
strut.
16-3-1-5
1 Empty the shovel or attachment, if appropriate, and
raise the loader arms enough to fit the safety strut.
2 Stop the engine.
3 Take care not to stand directly under any raised part
of the machine.
4 Fit the strut:
a Remove the strut from its stowage position C.
Fig 1. Mini CX
Fig 2. Mini CX 4x4
7 0 8 11 0
Ý
C
To Next Page
Loading...
