jcb Mini CX - Service Tools

Section E - Hydraulics
E-157 E-157
9803-9340-8
Service Tools
Numerical List
The tools listed in the table are special tools required for
carrying out the procedures described in this manual.
These tools are available from JCB Service.
Some tools are available as kits or sets, the part numbers
for parts within such kits or sets are not listed here. For full
details of all tools, including the content of kits and sets,
refer to Tool Detail Reference, Section 1.
Note: Tools other than those listed will be required. It is
expected that such general tools will be available in any
well equipped workshop or be available locally from any
good tool supplier.
Part
Number
Description Tool Detail Reference
1406/0011 Bonded Washer
K Fig 7. ( T E-161)
1406/0018 Bonded Washer K Fig 7. ( T E-161)
1406/0021 Bonded Washer K Fig 7. ( T E-161)
1406/0029 Bonded Washer K Fig 7. ( T E-161)
1604/0003 Adapter K Fig 8. ( T E-161)
1604/0004 Adapter K Fig 8. ( T E-161)
1604/0006 Adapter K Fig 8. ( T E-161)
1606/0003 Adapter K Fig 8. ( T E-161)
1606/0004 Adapter K Fig 8. ( T E-161)
1606/0007 Adapter K Fig 8. ( T E-161)
1606/0008 Adapter K Fig 8. ( T E-161)
1606/0009 Adapter K Fig 8. ( T E-161)
1612/0006 Adapter K Fig 4. ( T E-160)
816/00189 Blanking Cap K Fig 10. ( T E-162)
816/00190 Blanking Cap K Fig 10. ( T E-162)
816/00193 Blanking Cap K Fig 10. ( T E-162)
816/00196 Blanking Cap K Fig 10. ( T E-162)
816/00197 Blanking Cap K Fig 10. ( T E-162)
816/00294 Blanking Cap K Fig 10. ( T E-162)
816/15118 Pressure Test Adapter K Fig 3. ( T E-160)
816/50043 'T' Adapter K Fig 11. ( T E-162)
816/55038 Pressure Test 'T' Adapter K Fig 2. ( T E-160)
816/55040 Pressure Test 'T' Adapter K Fig 2. ( T E-160)
816/60096 'T' Adapter K Fig 11. ( T E-162)
892/00047 'T' Adapter K Fig 11. ( T E-162)
892/00048 'T' Adapter K Fig 11. ( T E-162)