jcb Mini CX - Numerical List Section E- Hydraulics

Section 1 - General Information
Service Tools
Numerical List Section E- Hydraulics
1-19 1-19
9803-9340-8
Numerical List Section E- Hydraulics
The tools listed in the table are special tools required for
testing, removing and replacing hydraulics. These tools
are available from JCB Service.
Note: Tools other than those listed will be required. It is
expected that such general tools will be available in any
well equipped workshop or be available locally from any
good tool supplier.
Part
Number
Description Tool Detail Reference
1406/0011 Bonded Washer
K Fig 9. ( T 1-23)
1406/0018 Bonded Washer K Fig 9. ( T 1-23)
1406/0021 Bonded Washer K Fig 9. ( T 1-23)
1406/0029 Bonded Washer K Fig 9. ( T 1-23)
1604/0003 Adapter K Fig 10. ( T 1-23)
1604/0004 Adapter K Fig 10. ( T 1-23)
1604/0006 Adapter K Fig 10. ( T 1-23)
1606/0003 Adapter K Fig 10. ( T 1-23)
1606/0004 Adapter K Fig 10. ( T 1-23)
1606/0007 Adapter K Fig 10. ( T 1-23)
1606/0008 Adapter K Fig 10. ( T 1-23)
1606/0009 Adapter K Fig 10. ( T 1-23)
1612/0006 Adapter K Fig 6. ( T 1-22)
816/00189 Blanking Cap K Fig 12. ( T 1-24)
816/00190 Blanking Cap K Fig 12. ( T 1-24)
816/00193 Blanking Cap K Fig 12. ( T 1-24)
816/00196 Blanking Cap K Fig 12. ( T 1-24)
816/00197 Blanking Cap K Fig 12. ( T 1-24)
816/00294 Blanking Cap K Fig 12. ( T 1-24)
816/15118 Pressure Test Adapter K Fig 5. ( T 1-22)
816/50043 'T' Adapter K Fig 13. ( T 1-24)
816/55038 Pressure Test 'T' Adapter K Fig 4. ( T 1-22)
816/55040 Pressure Test 'T' Adapter K Fig 4. ( T 1-22)
816/60096 'T' Adapter K Fig 13. ( T 1-24)
892/00047 'T' Adapter K Fig 13. ( T 1-24)
892/00048 'T' Adapter K Fig 13. ( T 1-24)
892/00055 Blanking Plug K Fig 11. ( T 1-23)
892/00056 Blanking Plug K Fig 11. ( T 1-23)
892/00057 Blanking Plug K Fig 11. ( T 1-23)
892/00059 Blanking Plug K Fig 11. ( T 1-23)
892/00060 Blanking Plug K Fig 11. ( T 1-23)