jcb Mini CX - Page 253

Section E - Hydraulics
Pumps
Transmission Pump - Series 2 Machines
E-83 E-83
9803-9340-8
5 Remove the ‘O’ ring K Fig 14. ( T E-83).
864680A
Fig 14.
6 Pry off the charge pump housing
K Fig 15. ( T E-83).
864680A
Fig 15.
7 Lift out charge pump rotor assembly A and wear plate
B. Note the locating pin C
K Fig 16. ( T E-83).
864680C
Fig 16.
Replacement
1 Renew the Kantsil ring D. Check that the unloading
channel E is clear and the locating pin F is
undamaged K Fig 17. ( T E-83).
864680D
Fig 17.
2 Fit the wear plate noting the direction of rotation
K Fig 18. ( T E-83).
864691A
Fig 18.
3 Illustrations show wear plate and pump rotor
assembly positioned for clockwise direction of
rotation.
Install the pump rotor assembly with the chamfered
side towards the cover
K Fig 19. ( T E-84).
ß
Þ
Ý
Ú
Û
Ü