jcb Mini CX - Page 70

Section 3 - Maintenance
Routine Maintenance
Service Schedules
3-10 3-10
9803/9340-8
Functional Test and Final Inspection
Operation 10 50 500 1000 2000
ENGINE
Idle Speed
(1)
(1) Jobs should be done by a specialist.
- Check and Adjust
Exhaust System Security/Fouling - Check
Exhaust Smoke (excessive) - Check
Throttle System and Control Cable - Check and Adjust
TRANSMISSION
Creeping in Neutral - Check and Adjust
Transmission Charge Pressure - Check
HYDRAULICS
Operation All Services - Check
Main Relief Valve Pressure
(1)
- Check and Adjust
Excavator Valve and Controls - Check
Auxiliary Relief Valve Pressure
(1)
- Check and Adjust
Steer Pressure
(1)
- Check
Priority Steer Valve Operation - Check
BRAKES
Parking Brake Operation - Check
Parking Brake Pads/Disc - Check for Wear
ELECTRICS
Starter Motor
- Check
Alternator
- Check
Gauges and Warning Lights - Check
Cab Switches - Check Operation
Horn Operation - Check
Reverse Alarm (if fitted) - Check
Lights and Indicators (if fitted) - Check
Operation of All Electrical Equipment - Check
ATTACHMENTS
Attachment Condition and Operation - Check
PAINTWORK
Condition - Check
GENERAL
Fluid Leaks (e.g. coolant, engine oil, hydraulic
oil, etc.)
- Check