Section 3 - Maintenance
Routine Maintenance
Engine Cooling System
3-37 3-37
9803/9340-8
Cleaning the Coolant Radiator
1 Park the machine on level ground within reach of a
compressed air line. Stop the engine and remove the
key. Raise the engine cover.
2 After allowing the engine to cool down use
compressed air to remove debris from the radiator
and oil cooler. Always blow the air backwards through
the radiator. i.e from the back of the machine to the
front.
3 Use a brush to remove any further debris.
4 Inspect the radiator for damage.
5
Close the engine cover.
To Next Page
Loading...
