Jeep Gladiator 2020 - Page 105

GETTING TO KNOW YOUR VEHICLE 103
4. If equipped, remove the rear lower interior soft trim
panel attached by a hook-and-loop fastener.
Interior Soft Trim Panel (If Equipped)
5. Remove the two Torx head fasteners that secure the hard
top
to the vehicle (along the interior bodyside rearward of
the back doors) using the #T50
Torx head driver.
6. Remove the four Torx head fasteners that secure the hard
top
to the back of the vehicle cab using the #T50 Torx
head
driver.
Torx Head Fastener Locations
2